CAPACITY
2500 lbs. at 24” load center
BATTERY
Compartment: 26.37” x 9.06” x open. An-
derson 175 Gray—A-11 Minimum battery
weight 340 lbs.
SPEED
24-volt ZAPI ACO Travel Controller
TRAVEL
Variable from 0 mph to 3.4 mph empty
Variable from 0 mph to 3.1 mph loaded
LIFT
Up to 33 fpm empty.
Up to 25 fpm loaded
LOWERING
Up to 29 fpm empty.
Up to 57 fpm loaded
WEIGHT
1943 lbs. Chassis Only
TIRES / WHEELS
DRIVE
9” x 3” polyurethane
DUAL LOAD
(2) 3.9” x 2” polyurethane
HYDRAULICS
Lift cylinder is hard chrome. Pump unit
includes motor, gear pump, and solenoid.
Pressure compensated lowering valves
regulates lowering speeds.
ELECTRICAL
ZAPI AC travel controller and AC drive
motor provides high torque throughout the
entire drive range. Regenerative braking
and brushless design drastically reduces
maintenance.
Travel speed remains constant relative to
throttle position regardless of the load on
truck. Automatic resetting circuit breaker
and one piece micro switch design com-
plete the system.
BRAKES
Electromagnetic brake is mounted on mo-
tor armature shaft multiplying the braking
power through the ZF GK10 transmission.
Brake is applied when control arm is in the
vertical or horizontal handle position.
Travel speed is reduced when forks are
above 12” fork height. Neutral braking re-
sists roll back on ramps.
CONTROLS
Travel, lift, and lower functions are located
in the ergonomic operator handle, de-
signed to allow operation with either hand.
Wrap around guard, reversing switch,
thumb control, and horn are standard.
Crawl speed function while steer handle is
slightly back-tilted from vertical. This al-
lows for easy maneuvering at reduced
travel speeds in tight places.
TRANSMISSION
Vertically mounted drive motor is direct
mounted to gear housing. Oil bathed ZF
GK10 hypoid bevel gear drive-train
transfers power to axle. State of the art
optimized gear technology supplies
advantages such as minimal envelope
circle, zero maintenance, low noise level,
high efficiency and high performance.
FRAME AND MAST
Bolt-on high visibility I-beam construction,
lift cylinders are positioned in outer I-beam
for good operator visibility through mast.
Dual lifting chains.
Three inch wide adjustable straddle legs
allow easy operation in racked aisles.
Straddle leg inside dimension (ID) can be
set at 38” to 50” in 4” increments; 42” to
50” with the triple stage mast
Class two ITA fork carriage with 36” tall
load back rest.
BEARINGS
DRIVE
WHEEL-Tapered
roller
bearings
sealed in oil bath
LOAD WHEELS-Sealed ball bearings
ACCESSIBLITY
Removal of two piece power head cover
exposes major components for inspection
and maintenance. Drive wheel is removed
with one nut.
STANDARD EQUIPMENT
Adjustable Straddle Legs
3” Wide Straddle Leg
Regenerative Neutral Braking
Creep Speed Handle Control
Gas Assist Spring Handle
Low Battery
Interrupt
Hour Meter BDI Combo Gauge
Key Switch
OPTIONAL EQUIPMENT
48” tall load backrest
Cold conditioning
Four Pack Power MF 224 AH / 5.4
kwh 110VAC plug-in charger
Industrial Battery 255 AH 5.9 kwh
PDS25
Power Drive
Straddle Trucks
www.totalwarehouse.com
833-868-2500
PDS
2500 Lbs. Capacity
Power Drive Straddle Truck
DIMENSIONS
Big Lift LLC
www.bigjoeforklifts.com
630-916-2600
Certification
All units are built to be in compliance with the Occupational Safety & Health Act (OSHA)
Big Lift LLC will not assume liability for injuries or damage arising from, or caused by, the removal of any safety devices from their vehicles by user. Because of
the Big Lift LLC continuing product improvements, specifications are subject to change without notice.
© Copyright 2015, Big Lift LLC Printed USA 0115
ID
OD
PDS 25-106
Two St�ge
106
71
142
38 to 50
44 to 56
1726
PDS 25-130
Two St�ge
130
83
165
38 to 50
44 to 56
1816
PDS 25-142
Two St�ge
142
89
178
38 to 50
44 to 56
1858
¹ PDS 25-153
Two St�ge
153
95
189
38 to 50
44 to 56
1943
¹¹PDS 25-157
²TriMast
157
71
50
193
42 to 50
48 to 56
2156
Lift
Height
Col
Height
Ext
Height
w/LBR
2500 Capacity @ 24" Load Center ITA Class II Fork Carriage
Free
Lift
Model #
Adjustable Straddle
Leg 4" Increments
³ Weight
Chassis
Only
Mast
36"
40"
48"
36"
63.5"
63.5"
63.5"
40"
64.5"
64.5"
64.5"
48"
69.5"
69.5"
69.5"
Load Length
Load
Width
Aisle dimensions listed above assume the
minimum bay width to be straddle OD plus
5” (2.5” on each either side of straddle leg).
Straddle OD is the load width plus 8”. Truck
performance may vary due to application re-
quirements' and changes in model design.
Add: 2” to aisle for model PDS25-157 with
triple stage mast.
Aisle Guide
PDS25 - Right Angle Stacking
For ease of use add 8” to aisle dimension listed
³Estimated shipping weight without battery
Note: Length of straddle
from carriage face to tip
of fork 29.5”
¹Derate 500 lbs. above 142”
¹¹Consult factory for derate
²Minimum straddle ID 42”
www.totalwarehouse.com
833-868-2500