ELECTRIC
HEAVY- DUTY
COMPACT
FORKLIFT
–
MINIMUM
SPACE
REQUIREMENT
LOAD CAPACITIES UP TO 30.0 TONS
USER-SPECIFIC LIFT HEIGHTS
POWERFUL
YET
COMPACT
The HUBTEX RoxX Electric Heavy-duty Compact Forklift is in its
natural environment whenever heavy loads have to be transported,
loaded or shipped in the tightest of spaces.
The RoxX can be used both indoors and outdoors. Compared
to conventional forklifts, the RoxX boasts extremely compact
dimensions in terms of length and width. In other words, the
HUBTEX Compact Forklift can be used where conventional forklifts
are not suitable due to their considerably larger dimensions.
All vehicles in the RoxX device series have a stable and robust
free-view lift mast and offer maximum manoeuvrability and
optimum all-round visibility from the driver’s cabin.
> Load capacities from 8 t to 30 t
> Environmentally friendly and quiet
> Electric drive
> Special free-view lift mast
> Indoor and outdoor applications
> Maximum manoeuvrability and space saving
> Optimum all-round visibility
Electric Heavy-duty Compact Forklift
in detail
Thanks to the patented steering system,
even the narrowest of spaces are accessible.
Features
RoxX
Load capacity (t)
8 – 30
Lift height (mm)
up to 10,000
Tyres
Elastic or PU
Lift height (mm)
User-specific
Cabin
Ergonomic seated driver‘s cabin
Operation
Multifunction joystick
Battery voltage (V)
80
Comfort and optimally
equipped with the
STEERING SYSTEM
Whether you are carrying coils, paper rolls,
converters or die tools, the RoxX transports all
loads safely and reliably. The RoxX offers
significant advantages over classic forklifts,
mainly due to its compactness. It is up to
25 % narrower and around 20 % shorter yet
retains the same load capacity.
Two steering systems are also available for
the RoxX. An electro-hydraulic steering system
with a steering axle is installed as standard.
Further space savings are possible with the
optional available electric steering system.
Thanks to a new, patented single-wheel
steering system, the turning radius is also
significantly reduced. The reduction is around
50 % compared to the standard steering
system. In this case, the pivot point of the
vehicle is ideally in the centre of the drive axle.
LIFT MAST
The construction of the mast is crucial. On
the one hand, the mast must be able to carry
heavy loads and move safely, on the other, it
must not restrict the driver‘s view.
We offer different versions of the mast for
optimal flexibility. The masts range from
a 2-stage Simplex lift mast (standard model)
with maximum view of the load to a 2-stage
lift mast with full free lift (Duplex) or a 3-stage
lift mast with full free lift (Triplex) for low mast
heights.
All models can be tilted from − 5 degrees to
+5 degrees.
Duplex mast
Simplex mast
Triplex mast
CABIN
The optimally designed mast and the large window areas
offer the driver an unobstructed all-round view from the
spacious driver‘s cabin.
All hydraulic functions are controlled with the ergonomically
arranged multifunction joystick. The vibration -dampened
cabin and the sprung multi- adjustable seat, ensure fatigue-
free and smooth operation. Non-slip steps allow easy and
more importantly, safe entry.
Depending on the requirements, the load is picked
up using fork arms or the appropriate attachment.
ELECTRIC
DRIVE
The HUBTEX RoxX
is electrically driven.
This drive concept is
30 % more efficient
than a hydrostatic drive.
Foundry version
of Heavy-duty Compact Forklift
ADVANTAGES COMPARED TO
THE STANDARD VERSION:
> Protection of temperature-sensitive parts,
such as hydraulic lines
> Installation of the entire drive and control
technology inside the vehicle
> Protected inside hydraulic lines in the mast
> Significantly improved visibility through the
use of a telescopic arm
> Washers with quick change system in
the cabin
> Wheel arches protect the tyres from damage
> Lower axle loads to reduce the point load on
the building floors
Standard Heavy-duty Forklifts often have
high maintenance and repair costs when used
in foundries. This is due to the special require-
ments for foundries applications, for example
when handling converters, sparks and splashes
of liquid iron affects the difficult-to-protect
components.
HUBTEX therefore decided to develop a
completely new type of Heavy-duty Forklift.
The design was precisely aligned to the
production and operating conditions in a
foundry. By using the foundry version of the
HUBTEX Truck, ongoing service costs are
greatly reduced, performance is enhanced
and the total cost of ownership is significantly
reduced.
02/2020/000.2358
Subject to technical changes. Some of the illustrations contain optional extras which are not part of the standard scope of delivery. Performance details are non-binding guide values.
HUBTEX VEHICLES
ELECTRIC-MULTIDIRECTIONAL-SIDELOADERS > DIESEL-/GAS-FOUR-WAY-SIDELOADERS > MULTIDIRECTIONAL
COUNTERBALANCE FORKLIFT > ORDER PICKING SYSTEMS > GLASSTRANSPORT SYSTEMS > HEAVY DUTY
TRANSPORT VEHICLES > REACH TRUCKS > SPECIAL TRUCKS > SECOND-HAND-AND RENTAL EQUIPMENT