ADVANCED ENGINE TECHNOLOGY
Platinum G06 Series are powered by an Isuzu 4HK1-TC,
5.2-liter, industrial diesel engine. The combination of electronic fuel
injection and engine turbo charging technology results in higher
power and increased efficiency, with emission levels well below EPA
Tier III requirements.
The engine’s single overhead cam (SOHC) and 16 valve (four valves
per cylinder) design maximizes the air flow into and out of the engine,
providing highly efficient optimization of the fuel, air, and exhaust
flow, resulting in improved fuel efficiency by increasing air intake and
discharge efficiency. Maximum horsepower and torque at low rpm
results in increased engine durability.
As an added safeguard for your investment, the Platinum G06
includes an engine protection and warning system to reduce engine
rpm in the event of excessive heat generation. An electronically
regulated, Quick Glow System results in considerably reduced glow
times, providing faster engine starting in cold weather.
ELECTRONIC FUEL INJECTION
An electronic, common rail fuel injection system analyzes engine
performance parameters and optimizes engine operation, resulting
in enhanced productivity and lower fuel consumption. The diesel
engine control module (DCM) uses a feedback loop to respond
to sensor input to control engine related functions, such as proper
air/fuel ratio, injection timing, and speed, based on the requirements
of the application.
The common rail, high-pressure fuel injection system improves
combustion efficiency by ultra high-pressure fuel injection. With
common rail injection technology, the fuel injector for each cylinder
is constantly provided with extremely high pressure fuel from the
rail. The DCM controls the injection pulses to regulate the injection
timing and the amount of fuel injected into each cylinder, for
optimized fuel combustion. This electronic control offers improved
fuel consumption, substantially lower emissions of nitrogen oxides
(NOx) and near elimination of particulate matter.
INTERCOOLED TURBO DIESEL
The G06 Series’ engine turbocharger and intercooler increases
the engine’s rated output for high productivity. The turbo creates
more power by force-feeding compressed air to the cylinders. The
turbocharger system provides constant boost pressure over the
entire rpm range, for excellent torque at low speeds. To maximize
the benefits of the turbo-charger, an intercooler chills the compressed
air, for a denser intake charge, allowing for greater combustion and
increased power output.
COOLED EXHAUST GAS
RECIRCULATION (EGR) SYSTEM
The exhaust gas recirculation system (EGR) returns a measured
amount of exhaust gas back to the combustion chamber, to reduce
the combustion temperature and reduce the concentration of oxygen
in the combustion chamber, reducing the formation of nitrogen oxide
(NOx). An EGR cooler reduces the exhaust temperature prior to
mixing into the intake stream, preventing loss of air charge density.
DURABLE DESIGN FEATURES
The G06 Series is built for toughness, with a robust mast, strong
frame, thick steel fenders, and heavy-duty drive and steer axles.
The wide-opening engine hood features gas strut supports for easy
opening/closing. A detent on one strut helps keep the hood open
during servicing. Insulation under the hood helps reduce noise for a
more comfortable ride for the operator.
The G06 features transmission driven, triple hydraulic pumps
providing enhanced efficiency, durability and accessibility. One pump
is used for lifting and load handling, one pump for the power steering
system, and a third pump for the hydraulically boosted brake system.
A priority load sensing control valve allows excess hydraulic fluid
from the steering system to supply hydraulic oil to the lift system for
increased lift speeds.
The G06’s superior cooling system consists of an oversized fan and
wide cooling outlet, for enhanced airflow. The heavy-duty radiator,
with transmission oil cooler, is rubber mounted to reduce flexing
and absorb vibration for enhanced reliability. The improved cooling
capacity translates into dependable cooling efficiency under heavy
usage or high ambient temperatures. A cyclone air cleaner helps
extend filter life, while a sensor on the dash panel will indicate
inadequate airflow, to help prevent overheating.
A heavy-duty steer axle protects the steer cylinder from damage.
The rear axle includes grease fittings for easy lubrication to provide
longer life and steering ease.
Lift cylinders include oil return piping for reduced heat generation
and extended life. The mast’s rugged precision ball bearings deliver
smooth operation and maximum control while telescoping. A flow
control valve restricts the lowering speed of the mast in the event
hose pressure is lost. Tilt lock valves give smooth mast tilt operation
in both directions.
SS-G06 09-2015 Printed in U.S.A.
UniCarriersAmericas.com
UniCarriers® is a registered trademark of UniCarriers Corporation.
Platinum® is a registered trademark of UniCarriers Americas. UniCarriers
Americas Corporation reserves the right to make product changes relating
to colors, equipment, specifications or available options without notice.
For more information, contact your UniCarriers representative.
www.totalwarehouse.com
833-868-2500