Lift-Rite, Tel: Toll Free from USA: 1-800-558-6012, Greene, NY 13778, Publication Number 1234959A ©2016 Dated 07 June 2016
SYSTEM SETUP
Mounting the Pump Handle
1. Make sure the lever is pushed down to the
“pump” position.
2. Thread the chain through the hole in the
triangle and through the hole in the axle.
3. Place the handle bar onto the triangle and
insert the bolts.
4. Tighten the bolts firmly.
5. Push the silver part “A” on the outside of
the pump downwards.
6. At the same time; insert the chain into the
open side of the slot “B” on the inside of
the pump.