Lift-RiteInc.,55 Walker Drive, Brampton, Ontario, L6T 5K5 • Phone (905) 456-2603 • Fax (905) 456-1383 • Web www.liftrite.com
ISO 9001:2000 REGISTERED Quality Management System ISO 14001:2004 REGISTERED Environmental Management System
Owners Manual /Operating Instructions April 2008
SAFETY PROCEDURES
(Read and understand prior to using this product)
MAINTENANCE
LUBRICATION
All pivot points are equipped with permanently lubricated bushings and bearings. To increase bearing life, it is rec-
ommended that a few drops of light machine oil be applied at each pivot point every 6 months. The thrust plate is
equipped with three grease fittings. Apply grease under normal conditions every 6 months.
DAILY INSPECTION
OPERATING INSTRUCTION (Read and understand prior to using this product)
NOTE:
The neutral position disengages the
pump from the lifting mechanism.
This frees the handle, which makes
pulling loads much easier.
In addition, the pump is not subject
to shock pressures while the truck is
in motion.
● Never overload your hand pallet truck. Stay within rated capacity.
● Do not operate this truck if damaged or not in proper working order.
● Distribute the load evenly on the forks, do not concentrate loads at one point or load one fork more than the other.
● Only handle loads on flat level surfaces. Do not use this truck with load on inclines or declines.
● Never put your feet, hands or any other body part under the frame assembly.
● Do not allow your hand pallet truck to drop from one level to another. Even a drop of 1” (25mm) more than
doubles the effective load momentarily and results in a “Shock” which can bend or break components.
● Always ensure load is stable before moving to eliminate opportunity for load shift.
● When not in use, lower forks completely to avoid injury.
�
To raise load, push down
on finger tip control.
Pump handle to raise load
from floor.
�
To lower load, pull up on
finger tip control.
�
For free handle movement,
place finger tip control in
neutral position.
CHECK
POINTS
ACTION
Steering
Check full
rotation
Hydraulic
system
Check for
excessive oil
on exterior
Wheels
Check for wear,
damage and
remove debris
Chassis
Check for
damage and
remove debris
Lifting/
lowering
Check for
function
Labels
Check for
readability