linde_spec_1202_12pg_2020707
ANSI: Standard truck meets all applicable mandatory requirements of ANSI/ITSDF B56.1 standards for powered industrial trucks.
NOTE: Performance data may vary due to motor and system efficiency tolerances. The performance depicted represents nominal values obtained under typical operating conditions. Metric dimensions are in millimeters unless otherwise specified. All metric dimensions are not direct equivalents due to rounding data. The descriptions and specifications included on this data sheet
were in effect at the time of printing. KION North America Corporation reserves the right to make improvements and changes in specification or design without notice and without incurring obligation. Please check with your authorized Linde dealer for information on possible updates or revisions.
For more information on Linde Material Handling equipment, please contact:
KION North America Corporation
2450 West 5th North Street, Summerville, SC 29483
Phone: (843) 875.8000 Truck Sales Fax: (843) 875.8471
Email: trucksales.na@kiongroup.com
www.kion-na.com
INTERNAL COMBUSTION ENGINE COUNTERBALANCE
H20 - H35
4,500 - 7,000 lb. Capacity
Series 1202
→ Hydrostatic drive, dual pedal control and Linde Load Control enable efficient load handling
→ Robust construction and maintenance-free components guarantee high truck availability
→ Slant mast profiles, narrow A-pillar, lowered front plate and see-through roof ensure
outstanding visibility
→ Wireless truck data transmission assists with fleet management programs
→ The low center of gravity and intelligent assistance systems reduce the risk of tipping
and loading accidents
CHARACTERISTICS
Service
→ Robust construction with low wear or even maintenance free components
ensure high truck uptime
→ Truck “health status” monitoring assist in effective fleet management
programs
→ Linde Engine Protection System provides additional protection against engine
damage
→ Extra-large service access openings facilitate easy component access
Safety
→ Shaped overhead guard legs and mast profiles, together with unique hose
routing deliver outstanding all-around visibility
→ Optional armored glass overhead guard top will allow unsurpassed load
visibility at elevated heights
→ Low center of gravity and high mounted (pivoting) steer axle enhance stability
while cornering
→ Linde assist systems support the operator in avoiding tip over situations
Handling
→ Linde Load Control and dual pedal travel control ensure precise operation of
all movements
→ Programmable “smart” buttons allow quick access to frequently used
functions
→ Overhead tilt cylinders enhance torsional stability and allow superior residual
capacity at high lift heights
→ Fuel consumption is minimized through low average engine RPM – effectively
reducing operating cost
Ergonomics
→ Ergonomic and intuitive operating concept maximizes driver comfort
→ Neoprene bearings between chassis, mast and tilt cylinder reduce negative
effect of impact and vibrations
→ Large variety of available seats, assist in preventing operator fatigue
→ 3.5” color graphic display provides easy to read truck status
STANDARD & OPTIONAL EQUIPMENT
STANDARD
→ Floating cab
→ Tiltable steering column
→ Full suspension, weight adjustable seat
→ 3.5” color display
→ Linde Hydrostatic Drive
→ Deutz Diesel Engine or Deutz LP Engine
→ LEPS, Linde Engine Protection System
→ Variable displacement hydraulic pump
→ Solid pneumatic tires (SE)
→ High mounted tilt cylinders
→ Slanted mast rails
→ Tilt cylinders with cushioned end stops
→ 6-roller carriages
→ Dual pedal travel control
→ Automatic parking brake (when engine is off)
→ Standard tilt range 5° forward/5° backward
→ 89.6” standard OHG with H20/600 and H25
→ 91.4” standard OHG with H25/600, H30 and
H35
→ Two front work lights (LED or halogen)
→ 48 month / 8,000 hour warranty
OPTIONAL
→ Large variety of tires
→ Anti load-spray mud flaps
→ Several travel speed reductions
→ Tilt angle pre-selection
→ Fork above ground stop
→ Simple, dual, and triplex masts
→ 8-roller carriages
→ Integrated side shifter
→ Integrated sideshifting fork positioner
→ Load backrest
→ Lowered overhead guard
→ Fully enclosed operator cabin with standard
top glass
→ Fully enclosed operator cabin with armored
top glass
→ Configurable half cab
→ Large variety of upgraded seats; heated,
cloth, and ventilated
→ Swiveling seats, 10 & 17 degrees
→ Seat belt interlock
→ Air-conditioned or heated cabin
→ Internal and external mirrors
→ Main hydraulic valve with up to five
functions
→ Auxiliary function hydraulic hose reeving
→ Halogen or LED road light packages
→ Front and rear LED stripe lights
→ Linde BlueSpot™
→ Load weight indicator
→ Back-up alarm
→ Flashing beacon
→ High exhaust routing
→ High mounted air intake
→ Single pedal travel control
Linde Series 1202 Five Features
Lowest Maintenance Cost:
→ 1000 hour periodic maintenance
→ No service brake maintenance or repair
→ Neoprene tilt cylinder and axle bearings
Highest Residual Capacity:
→ High rigidity mast rails
→ Low center of gravity
→ Best weight distribution
→ Overhead tilt cylinders
Superior Ergonomic Design:
→ Low noise level
→ Large foot room
→ Standard armrest with fingertip controls
→ Standard fully adjustable suspension seat
FEATURES
Highest Residual
Capacity
High Performance
Low Maintenance Cost
Energy Efficient
Superior Ergonomic
Design
Energy Efficient:
→ Low average engine RPM
→ Engine RPM is automatic, and demand
controlled
→ Hydrostatic drive system with axial piston
technology
High Performance:
→ Hydrostatic drive system
→ Standard dual pedal travel control
→ Automatic acceleration and deceleration
H20 - H35 TECHNICAL DATA
August 2020
H20 - H35 TECHNICAL DATA
August 2020
NOTICE: Products are subject to change without notice. Our products are continuously being improved, all conditions, terms, and specifications are subject to change at any time.
NOTICE: Products are subject to change without notice. Our products are continuously being improved, all conditions, terms, and specifications are subject to change at any time.
Characteristics
1.1
Manufacturer
LINDE
LINDE
1.2
Model designation
H20/600D and H20/600T
H25D and H25T
1.3
Power unit
Diesel / LP
Diesel / LP
1.4
Operation
Seated
Seated
1.5
Rated capacity
lb
kg
4500
2000
5000
2500
1.6
Load center distance
in
mm
24
600
24
500
1.8
Load distance, center of drive axle to
fork
x
in
mm
16.3
416
16.3
416
1.9
Wheelbase
in
mm
73.4
1865
75
1905
Weights
2.1
Service weight
lb
kg
8240
3738
8637
3918
2.2.1
Axle loading laden, front
lb
kg
10837
4916
12257
5560
2.2.2
Axle loading laden, rear
lb
kg
1812
822
1891
858
2.3.1
Axle loading empty, front
lb
kg
4025
1826
4093
1857
2.3.2
Axle loading empy, rear
lb
kg
4215
1912
4543
2061
Wheels/Tires
3.1
Tire type
SE, Solid Pneumatic
SE, Solid Pneumatic
3.2
Tire size, front
225/75-10 (23x9-10)
225/75-10 (23x9-10)
3.3
Tire size, rear
6.50-10
6.50-10
3.6
Track width front
b10
in
mm
38.2
972
38.2
972
3.6
Track width, rear
b11
in
mm
37.8
961
37.8
961
Dimensions
4.1
Mast tilt, forward/backward
α / ß
Degrees Degrees
5°/5°
5°/5°
4.7
Cab height
h6
in
mm
89.5
2275
89.5
2275
4.8
Seat height
h7
in
mm
42.2
1074
42.2
1074
4.12
Tow pin height
h10
in
mm
24.4
621
24.4
621
4.19
Overall lengh
l1
in
mm
144
3659
144
3699
4.20
Length to fork face
l2
in
mm
104.6
2659
106.2
2699
4.21
Overall width
b1 b2
in
mm
46.4
1180
46.4
1180
4.23
Type carriage
ITA Class 2
ITA Class 2
4.24
Carriage width
b3
in
mm
45.2
1150
45.2
1150
4.31
Ground clearance mast
m1
in
mm
4.7
121
4.7
121
4.32
Ground clearance chassis
m2
in
mm
5.1
130
5.1
130
4.33
Aisle width (48“ load, 8“ clearance)
Ast
in
mm
157.8
4010
159.5
1052
4.34
Aisle width (add load, add clearance)
Ast
in
mm
109.8
2789
111.4
2831
4.35
Outer turning radius
Wa
in
mm
93.4
2373
95.1
2415
5.1
Travel speed laden
mph
km/h
13.6
22
13.6
22
5.1.1
Travel speed empty
mph
km/h
13.6
22
13.6
22
Performance
5.2
Lift speed laden
fpm
km/h
104
.053
104
0.53
5.2.1
Lift speed empty
fpm
km/h
108
0.55
108
0.55
5.3
Lowering speed laden
fpm
m/s
110
0.56
110
0.56
5.3.1
Lowering speed empty
fpm
m/s
110
0.56
110
0.56
5.6
Max. drawbar pull laden
lbf
3272
14558
3242
14425
5.6.1
Max. drawbar pull empty
lbf
3271
14575
3276
14575
5.8
Max. gradeability laden
28
24
5.8.1
Max. gradeability empty
34
31
5.10
Service brake
Hydrostatic
Hydrostatic
Drive
7.1
Engine manufacturer / type
Diesel / LP
Deutz Diesel / LP
Deutz Diesel / LP
7.2
Engine power rating
hp
kW
40 / 30
48 / 36
40 / 30
48 / 36
7.3
Engine speed
rpm
2300
2300
7.4
Cylinders / Volume
cc
3 / 133.8
3 / 2194
3 / 133.8
3 / 2194
Other
8.1
Transmission system
Hydrostatic
Hydrostatic
8.2
Max hydraulic operating pressure
psi
bar
2900
200
3335
230
8.3
Max. hydraulic oil flow
GPM
LPM
13.2
50
13.2
50
8.4
Noise level
dB(A)
79
79
Characteristics
1.1
LINDE
LINDE
LINDE
1.2
H25/600D and H25/600T
H30D and H30T
H35D and H35T
1.3
Diesel L/P
Diesel L/P
Diesel L/P
1.4
Seated
Seated
Seated
1.5
lb
kg
5500
2500
6000
3000
7000
3500
1.6
in
mm
24
600
24
500
24
500
1.8
in
mm
17.9
455
17.6
448
17.8
453
1.9
in
mm
75
1905
75.9
1930
77.3
1965
Weights
2.1
lb
kg
9876
4480
10218
4635
9303
4978
2.2.1
lb
kg
13229
6001
14676
6657
16505
7487
2.2.2
lb
kg
2158
979
2156
978
2184
991
2.3.1
lb
kg
4664
2116
4812
2183
5046
2289
2.3.2
lb
kg
5218
2367
5405
2452
5928
2689
Wheels/Tires
3.1
SE, Solid Pneumatic
SE, Solid Pneumatic
SE, Solid Pneumatic
3.2
250/75-12
250/75-12
250/75-12
3.3
225/75-10 (23x9-10)
225/75-10 (23x9-10)
225/75-10 (23x9-10)
3.6
b10
in
mm
39.6
1008
39.6
1008
39.6
1008
3.6
b11
in
mm
37.8
961
37.8
961
37.8
961
Dimensions
4.1
α / ß
Degrees Degrees
5°/5°
5°/5°
5°/5°
4.7
h6
in
mm
91.4
2322
91.4
2322
91.4
2322
4.8
h7
in
mm
44
1119
44
1119
44
1119
4.12
h10
in
mm
25.3
643
25.3
643
25.3
643
4.19
l1
in
mm
147.1
3738
147.8
3756
149.4
3796
4.20
l2
in
mm
107.7
2738
108.5
2756
110
2796
4.21
b1 b2
in
mm
49.4
1256
49.4
1256
49.4
1256
4.23
ITA Class 2
ITA Class 3
ITA Class 3
4.24
b3
in
mm
45.2
1150
45.2
1150
45.2
1150
4.31
m1
in
mm
4.8
124
4.8
123
4.7
121
4.32
m2
in
mm
6.9
177
6.9
176
6.9
175
4.33
Ast
in
mm
161.1
4091
161.8
4110
163.4
4152
4.34
Ast
in
mm
112.9
2870
113.7
2889
115.3
2931
4.35
Wa
in
mm
95.1
2415
96.1
2441
97.5
2478
5.1
mph
km/h
13.6
22
13.6
22
13.6
22
5.1.1
mph
km/h
13.6
22
13.6
22
13.6
22
Performance
5.2
fpm
km/h
104
0.53
104
0.53
104
0.45
5.2.1
fpm
km/h
108
0.56
108
0.56
108
0.56
5.3
fpm
m/s
110
0.56
110
0.56
110
0.56
5.3.1
fpm
m/s
110
0.56
110
0.56
110
0.56
5.6
lbf
4434
19727
4405
19598
4368
19433
5.6.1
lbf
3701
16364
3796
16886
3983
17721
5.8
32
27
27
5.8.1
33
30
30
5.10
Hydrostatic
Hydrostatic
Hydrostatic
Drive
7.1
Diesel / LP
Deutz Diesel / LP
Deutz Diesel / LP
Deutz Diesel / LP
7.2
hp
kW
60 / 45
53 / 40
60 / 45
53 / 40
60 / 45
53 / 40
7.3
rpm
2300
2300
2300
7.4
cc
3 / 133.8
3 / 2194
3 /133.8
3 / 2194
3 / 133.8
3 / 2194
Other
8.1
Hydrostatic
Hydrostatic
Hydrostatic
8.2
psi
bar
2900
200
3263
225
3553
245
8.3
GPM
LPM
13.2
50
13.2
50
13.2
50
8.4
dB(A)
79
79
79
*Refer to Technical Data Chart
*Refer to Technical Data Chart
H20 - H35 TECHNICAL DATA
August 2020
H20 - H35 TECHNICAL DATA
August 2020
b2
b11
a-2
Wa
Ast
h1
m1
h10
h7
h6
h4
m2
l2
l1
h2
h3
ß
α
b10
b13
b3
b1
a-2
H20 - H35 CAPACITY RATINGS
August 2020
H20 - H35 CAPACITY RATINGS
August 2020
H20/600D and H20/600T 1.75”x4”x42” Forks
SE 23/9-10
Cascade 55F-SSS hang-on sideshifter
Capacity (lb) at 24” load center
h1 (in)
h3 (in)
h2 (in)
Type
Std. Carriage
Integrated
SS Carriage
Integral SSFP
Carriage
Integral SSFP
“View” Carriage
Hang-on
Sideshifter
90.0
127.2
0.0
Simplex
4500
4425
4400
4125
4350
94.0
135.0
0.0
Simplex
4500
4425
4400
4125
4350
105.8
158.7
0.0
Simplex
4500
4425
4400
4125
4350
86.0
126.0
58.8
Duplex
4500
4425
4400
4125
4350
89.9
133.9
62.8
Duplex
4500
4425
4400
4125
4350
103.7
161.4
76.5
Duplex
4500
4425
4400
4125
4350
86.0
187.4
58.8
Triplex
4500
4425
4350
4125
4325
88.0
193.3
60.8
Triplex
4500
4425
4350
4125
4325
89.9
199.2
62.8
Triplex
4500
4425
4350
4125
4325
97.8
218.9
70.6
Triplex
4500
4425
4350
4125
4325
103.7
236.6
76.5
Triplex
3800
3725
3625
3450
3625
H30D and H30T 1.75”x5”x42” Forks
SE 250/75-12
Cascade 55F-SSS hang-on sideshifter
Capacity (lb) at 24” load center
h1 (in)
h3 (in)
h2 (in)
Type
Std. Carriage
Integrated
SS Carriage
Integral SSFP
Carriage
Integral SSFP
“View” Carriage
Hang-on
Sideshifter
89.5
125.8
0.0
Simplex
6000
5900
5875
5450
5600
95.4
137.6
0.0
Simplex
6000
5900
5875
5450
5600
107.2
161.2
0.0
Simplex
6000
5900
5875
5450
5600
87.3
128.5
56.9
Duplex
6000
5900
5875
5450
5600
91.1
136.4
60.8
Duplex
6000
5900
5875
5450
5600
103.0
160.0
72.6
Duplex
6000
5900
5875
5450
5600
87.2
190.2
56.9
Triplex
6000
5900
5875
5450
5600
89.2
196.1
58.8
Triplex
6000
5900
5875
5450
5600
91.1
202.0
60.8
Triplex
6000
5900
5875
5450
5600
95.1
209.8
64.7
Triplex
6000
5900
5875
5450
5600
97.0
215.7
66.7
Triplex
5875
5700
5675
5275
5400
103.0
233.5
72.6
Triplex
5150
5000
4950
4600
4750
110.8
253.1
80.5
Triplex
4400
4250
4200
3925
4025
H35D and H35T 1.75”x5”x42” Forks
SE 250/75-12
Cascade 55F-SSS hang-on sideshifter
Capacity (lb) at 24” load center
h1 (in)
h3 (in)
h2 (in)
Type
Std. Carriage
Integrated
SS Carriage
Integral SSFP
Carriage
Integral SSFP
“View” Carriage
Hang-on
Sideshifter
89.5
125.8
0.0
Simplex
7000
7000
6950
6450
6500
95.4
137.6
0.0
Simplex
7000
7000
6950
6450
6500
107.2
161.2
0.0
Simplex
7000
7000
6950
6450
6500
87.3
128.5
56.9
Duplex
7000
7000
6950
6450
6500
91.1
136.4
60.8
Duplex
7000
7000
6950
6450
6500
103.0
160.0
72.6
Duplex
7000
7000
6950
6450
6500
87.2
190.2
56.9
Triplex
7000
7000
6950
6475
6500
89.2
196.1
58.8
Triplex
7000
7000
6950
6475
6500
91.1
202.0
60.8
Triplex
7000
6825
6775
6300
6500
95.1
209.8
64.7
Triplex
6575
6375
6325
5875
6075
97.0
215.7
66.7
Triplex
6225
6050
5975
5575
5725
103.0
233.5
72.6
Triplex
5250
5100
5025
4700
4800
110.8
253.1
80.5
Triplex
4475
4350
4275
4000
4075
H25D and H25T 1.75”x4”x42” Forks
SE 23/9-10
Cascade 55F-SSS hang-on sideshifter
Capacity (lb) at 24” load center
h1 (in)
h3 (in)
h2 (in)
Type
Std. Carriage
Integrated
SS Carriage
Integral SSFP
Carriage
Integral SSFP
“View” Carriage
Hang-on
Sideshifter
90.0
127.2
0.0
Simplex
5000
4975
4950
4625
4850
94.0
135.0
0.0
Simplex
5000
4975
4950
4625
4850
105.8
158.7
0.0
Simplex
5000
4975
4950
4625
4850
86.0
126.0
58.8
Duplex
5000
4975
4950
4625
4850
89.9
133.9
62.8
Duplex
5000
4975
4950
4625
4850
103.7
161.4
76.5
Duplex
5000
4975
4950
4625
4850
86.0
187.4
58.8
Triplex
5000
4975
4950
4625
4850
88.0
193.3
60.8
Triplex
5000
4975
4950
4625
4850
89.9
199.2
62.8
Triplex
5000
4950
4925
4600
4850
97.8
218.9
70.6
Triplex
4275
4075
4050
3775
4000
103.7
236.6
76.5
Triplex
3575
3400
3375
3125
3325
H25/600D and H25/600T 1.75”x5”x42” Forks
SE 250/75-12
Cascade 55F-SSS hang-on sideshifter
Capacity (lb) at 24” load center
h1 (in)
h3 (in)
h2 (in)
Type
Std. Carriage
Integrated
SS Carriage
Integral SSFP
Carriage
Integral SSFP
“View” Carriage
Hang-on
Sideshifter
89.5
125.8
0.0
Simplex
5500
5500
not available
not available
5350
95.4
137.6
0.0
Simplex
5500
5500
not available
not available
5350
107.2
161.2
0.0
Simplex
5500
5500
not available
not available
5350
87.3
128.5
56.9
Duplex
5500
5500
not available
not available
5350
91.1
136.4
60.8
Duplex
5500
5500
not available
not available
5350
103.0
160.0
72.6
Duplex
5500
5500
not available
not available
5350
87.2
190.2
56.9
Triplex
5500
5500
not available
not available
5325
89.2
196.1
58.8
Triplex
5500
5500
not available
not available
5325
91.1
202.0
60.8
Triplex
5500
5500
not available
not available
5325
95.1
209.8
64.7
Triplex
5500
5500
not available
not available
5325
97.0
215.7
66.7
Triplex
5500
5500
not available
not available
5325
103.0
233.5
72.6
Triplex
5250
5125
not available
not available
5025
110.8
253.1
80.5
Triplex
4475
4350
not available
not available
4275
DESIGNED FOR EFFICIENCY
Thanks to the optimized design of the chassis,
cabin and mast, drivers now have an even better
view in all directions. The particularly narrow A-pillar
gives the driver good visibility of the load and their
surroundings. The driving path is also easier to see
thanks to the slim mast profiles. The lowered front
plate also improves the visibility of the forks and the
load. The Linde Series 1202 is designed for
efficiency, with the driver in mind.
→ Armrest controls, within an ergonomic
workstation, enable precise operation
→ Nested mast rail offers unmatched all-around
visibility, increasing driver protection
→ Low noise level promotes an exceptional driving
experience
→ A full suspension seat decreases operator
fatigue
→ An optional panoramic armored glass roof
guarantees the best view upwards
BUILT FOR ALL CONDITIONS
The Linde Series 1202 represents everything that Linde forklift trucks stand for. It is extremely powerful, user-friendly,
robust and versatile with the ability to operate in countless applications.
→ A fully enclosed belly pan prevents unwanted dirt and debris from entering the engine area, increasing the ability for
operation in recycling and paper applications.
→ Automatic acceleration and deceleration promotes infinite speed control, delivering smoother transitions with speed.
→ Overhead tilt cylinders ensure the operator is working effectively and safely, increasing residual capacity.
→ The high periphery view mast aides in the prevention of loading accidents, as well as ensuring outstanding visibility
in all directions.
This vehicle offers durability, safety and productivity, resulting in the best solution for your material flow
requirements, both now and in the future.