Power Drive
Counterbalanced
Trucks
ELECTRICAL
All cables and wires are color coded and
or numbered for easy service and tracing.
Control circuits are fuse-protected, and
use plug-in type connector.
Curtis® travel controller provides infinitely
variable travel speeds with efficient use of
battery power.
Hydraulic lift pump motor is specially de-
signed for peak electrical efficiency at spe-
cific torque and rpm levels.
DRIVE SYSTEM and BRAKES
Compact, open frame 24V DC drive motor
provides ample torque and RPM at low
current and temperature levels.
Direct drive full oil bath transmission, oper-
ates through a 25:1 transmission ratio to
multiple the braking force for safe stopping
performance.
The drive motor, transmission, brake and
drive wheel are coupled to the control arm
via pivot tube that provides the operator
direct control of all drive functions.
PDC25
ACCESSIBLITY
Removal of one piece power head cover
exposes major components for inspection
and maintenance.
OPTIONAL EQUIPMENT
Hour meter
Battery discharge indicator (BDI)
Key switch
Lift lock out
Remote lift/lower buttons in handle
Remote lift and lower control box
36”, 42” or 48” wide fork carriage
Cold conditioning
Side shifting fork carriage
CAPACITY
2500 lbs. 24” load center
BATTERY
Compartment : 31.4” x 11.1” x open
A-15, SB-175 gray connector
PERFORMANCE
24-volt transistor travel controller
TRAVEL
From 0 mph to 3.0 mph empty
From 0 mph to 2.8 mph loaded
LIFT
Up to 42 fpm empty
Up to 22 fpm loaded
LOWERING
Up to 28 fpm empty
Up to 56 fpm loaded
DUAL TILT CYLINDERS
3° forward 9° back
CLASS II ITA FORKS
36”, 42” or 48” x 4” x 1.5” thick
TIRES
DRIVE WHEEL
10.5” x 5” crowned polyurethane
LOAD WHEELS
5” x 5” polyurethane
CONTROL HANDLE “All Steel”
Designed to allow smooth operation with
either hand. Protective wraparound hand
guard, rubber hand grips, horn, “Belly But-
ton” reversing switch, thumb and twist grip
travel control are all standard.
HYDRAULICS
The dashboard mounted lift and lower lever
allow uncomplicated and precise load
placement. Infinitely variable ball-type low-
ering valve provides a full range of lowering
speeds for optimum control .Premium de-
sign lift cylinder provides smooth lifting and
lowering. Pressure compensating flow con-
trol valve at base of lift cylinder regulates
lowering speeds.
www.totalwarehouse.com
833-868-2500
A = Aisle B = Bay
² Add 31” for 48” tall load backrest
PDC
DIMENSIONS
Right Angle Stacking Requirements
Aisle Dimensions
Aisle dimensions listed have zero clearance
Add 12” for ease of use
Fork OD Range
PDC 25
Load Capacity Chart
154” Maximum Lift Height
2500 Lbs. Capacity
Power Drive Counterbalanced
PDC 30
PDC 40
Big Lift LLC
www.bigjoeforklifts.com
630-916-2600
Certification
All units are built to be in compliance with the Occupational Safety & Health Act (OSHA)
Big Lift LLC will not assume liability for injuries or damage arising from, or caused by, the removal of any safety devices from their vehicles by user. Because of
the Big Lift LLC continuing product improvements, specifications are subject to change without notice.
© Copyright 2013, Big Lift LLC Printed USA 0713
24” Load Center
³ Estimated shiping weight without battery
www.totalwarehouse.com
833-868-2500