Landoll has designed the Bendi to be
the most space-efficient, versatile,
productive, safe, and reliable forklift
you can buy. It will meet the demands
of any storage and handling operation.
The Bendi’s articulating front axle
assembly allows the mast to rotate
a full 180°. This feature enables the
Bendi to operate in storage aisles as
narrow as 5 ½-ft (1.68M), depending
on load size and model. The Bendi is
more than just a narrow aisle truck.
With its front-loader configuration, it
can handle a wide variety of jobs and
eliminate the need for staging and
supporting equipment. This gives the
Bendi high stacking ability on standard
warehouse floors, while allowing the
low mast height necessary to work in
highway trailers or travel through low
doorways. Working in bulk storage
and congested manufacturing areas,
in pushback rack systems, rail cars,
and outdoors comes easy for the
Bendi. Load capacities range from
3,000-lbs (1,363kg) to 4,500-lbs
(2045-kg). The Bendi comes standard
with an 11.8-in (300-mm) side shifter
and can also be equipped with a
variety of hydraulic attachments, such
as a paper roll clamp, push/pull fork
positioner, drum clamp, and a carton
clamp to further enhance its versatility.
With the Bendi, you’ll discover that
space efficiency and versatility
result in unequalled productivity and
maximum equipment utilization.
The multi-purpose 4-wheel Bendi Narrow Aisle Forklift is able to work the
loading dock as effectively as a front loader, and still work in very narrow
aisles. The driver can unload a highway trailer and drive straight to the stor-
age location in a narrow aisle without staging or stopping.
Awkward wide loads can also
be handled effectively in narrow
aisle using the 4-wheel Bendi with
lift heights to 433-in (11M) and
capacities to 4,500-lbs (2,045-kg).
The 3-wheel Bendi offers a low
cost Very Narrow Aisle solution.
This truck, with lift heights to
360-in (9.14M), can stack in 72-in
(1.8M) aisles. Its simplicity and
ease of operation make the VNA
truck of choice for warehouse
application.
The Bendi offers the best visibility
while stacking. The entire length of
the load is visible to the operator
during stacking. There is no rear
end swing during stacking, so prod-
uct and rack damage is eliminated.
������������
�������
������